Contributor: Safesite HQ 2 Jurisdiction: General
Use this safety meeting to go over incidental spills of chemicals and hazardous materials in facilities, maintenance, and janitorial industries.
1. Spills at our workplace can cause slip hazards but may also cause environmental hazards. This safety meeting will discuss "incidental spills", which are typically on a smaller scale and would not be life threatening.
2. An "incidental spill" is hazardous, but limited in quantity, potential exposure, and toxicity. The threat of the safety or health of employees would be minor and the clean up process would not create an emergency response.
3. Use appropriate materials to clean up spills. The most effective materials to use are absorbent pads, granular types, and absorbent booms.
4. Ensure that the type of absorbent material used is correct for the type of spill being cleaned up. Check your SDS documentation and alert employees of any specific requirements.
5. All spill kits and absorbent material should be readily available to quickly clean up spills.
6. While spills can't always be avoided, there are ways to try to prevent them from happening in the first place.
7. Wherever you store chemicals, ensure it is stable, not overcrowded, and chemicals are at eye height. When storing chemicals in bulk, use containment platforms underneath pallets of drums or buckets, and containment pans where tanks are located. A visual inspection of containment areas should be completed regularly.
8. If you do experience a spill it is important to clean it up quickly, but use the amount of absorbent material necessary for the job.
9. Never push material or absorbents into drains. Do not mix absorbents that contain hazardous waste with material that is non-hazardous. Always dispose of your absorbent materials specified by your company's environmental plan.
10. In the case of an emergency spill under HAZWOPER, you should alert your safety and health contact within your company to immediately start the Emergency Action Plan for hazardous material release.
11. In what ways do you use chemicals at work? Do you know where your spill kits are located to effectively clean up potential spills?
Additional Comments